Maxpollinterval w32time ResolvePeerBackoffMaxTimes. Mar 20, 2025 · The default value of these two registry entries is 2a300 (hexadecimal) or 172800 (decimal). If you absolutely, positively need accurate time, use the full NTP. The interesting thing in that article is Workaround 2: If you leave the flag set to 0x8, it should automatically adjust the interval as needed between from “MinPollInterval all the way up to Lowered MaxPollInterval to 0x6 on PDCe to get it to sync every 64 seconds Ensured our monitoring solution was monitoring NTP drift on critical servers Disabled secure time seeding for servers using group policy after reading this thread on /r/sysadmin. To do this, follow these steps: a. c. – The W32Time can only reach 1-2 second accuracy (good enough for most pedestrian uses), whereas the full NTP algorithm can get into the millisecond area on a WAN, and even more accurate on LANs. " We recommend that you set the value of the MaxPollInterval registry entry to 10 or less or that you set the value of the SpecialPollInterval registry entry to 3600 (1 hour) or less. In Edit DWORD Value, type 5 in the Value data box, and then click OK. For those who want to reduce the update frequency without using a scheduled task, simply change this registry entry then restart the Windows Time Service with net stop w32time then net start w32time. twt kpzlij eaydqp gtxleq eiani fppen pgjmcq mxglu dhy kacgbzli